Black Friday sale on now
Was A$49, now A$39.20 — 20% off.
Turn your Starlink Mini on or off without touching a cable.
The VANKOR Remote Switch gives you wireless dual remote power control from wherever you’re sitting — one click, done. No unplugging, no crawling to the back of the van, no interrupting your setup.
Two pre-paired remotes included — one for you, one as a spare. Weatherproof plugs built to the same spec as the factory Starlink cable.
Option B — Install at Power Source (in stock)
Plug the switch into your power supply, then run your own 1 m or 2 m lead to your Starlink Mini.
Power in on the male end: power supply → switch → extension cable → Starlink Mini. Choose this when you want the switch at the power source, not at the dish. Not compatible with the VANKOR Starlink Mount Kit.
Which option do I need?
The unit is directional. It only works one way. If it is plugged in reverse, or you choose the wrong type, the Mini will power on but will not turn off with the remote.
Option A — Install at Dish / Direct Mount (currently out of stock). The switch mounts directly to the back of your Starlink Mini. Male end plugs into the dish; female end takes your power cable (POWER IN ON FEMALE END). Choose this if you have the VANKOR Starlink Mount Kit with converter. Install at the dish, not at the power supply.
What’s in the box
- VANKOR Remote Switch
- 2 wireless remotes (pre-paired, ready to use)
Specs
- Input: 12V / 24V DC (9–28V)
- Remotes: 2 (pre-paired)
- Weatherproof plugs
- 12V and 24V compatible
